Comprehensive Guide to Installing IPTV on Enigma 2/Linux Using Putty

Setting up IPTV on your Eni-gma 2/Linux device may seem complex, but with detailed instructions and the right tools, it can be done efficiently. This guide will walk you through each step, ensuring that you have a seamless installation process using Putty, a terminal emulator.

Enigma Step 1: Identify Your Device’s IP Address

To begin, you need to find your device’s IP address. This address is crucial for establishing a connection between your Windows PC and your Eni-gma 2/Linux device. Follow these steps:

  1. Navigate to the Settings menu on your En-igma 2/Linux device.
  2. Go to Setup.
  3. Select System Network Device.
  4. Choose Setup Adapter.
  5. Click on Settings.

Within the settings, you will find the IP address of your device, which usually starts with “192.168….”. Make sure to write this down as you will need it for the subsequent steps.

Enigma Step 2: Download and Install Putty on Your Windows PC

Next, you need to download and install Putty on your Windows PC. Putty is a free and open-source terminal emulator that facilitates the connection to your En-igma 2/Linux device. Here’s how you do it:

  1. Open your preferred web browser and search for “Putty download”.
  2. Download the Putty installation package from a trusted source, such as the official Putty website.
  3. Once downloaded, run the installer and follow the on-screen instructions to complete the installation.

Eni-gmaStep 3: Configure Putty to Connect to Your Device

With Putty installed, the next step is to configure it to connect to your Eni-gma 2/Linux device using the IP address obtained earlier. Follow these steps:

  1. Open Putty on your Windows PC.
  2. In the Host Name (or IP address) field, enter the IP address of your Eni-gma 2/Linux device.
  3. In the Port field, enter “23”. This is the default port for Telnet connections.
  4. Ensure the connection type is set to Telnet.

Step 4: Establish Connection and Login

After configuring Putty, it’s time to establish the connection:

  1. Click on Open to initiate the connection.
  2. A terminal window will appear, prompting you for login credentials.
  3. By default, both the login and password are “root”. Enter “root” when prompted for the username and password.

Step 5: Enter Your IPTV Subscription Line

Once logged in, you need to input the command line provided by your IPTV service provider. This command line typically includes a script that downloads and sets up the IPTV configuration on your Eni-gma 2/Linux device. The general format of the command is:


wget -O /etc/enigma2/iptv.sh “your m3u link” && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh

Here’s how to enter the command in Putty:

  1. Copy the entire command line provided by your IPTV service provider.
  2. In the Putty terminal window, right-click to paste the copied command.
  3. Press Enter to execute the command.

Step 6: Reboot Your Device

To finalize the installation, you need to reboot your Enigma 2/Linux device. This will apply the new IPTV settings and ensure that your device is ready for use:

  1. In the terminal window, type the command reboot.
  2. Press Enter.

Your device will restart. Once the reboot process is complete, your IPTV service should be set up and operational.

Troubleshooting Tips

If you encounter any issues during the installation process, here are a few troubleshooting tips:

  • Double-check your IP address: Ensure that you have entered the correct IP address in Putty.
  • Verify your command line: Make sure that the IPTV command line provided by your service provider is correct and complete.
  • Check your network connection: Ensure that both your Windows PC and your Enigma 2/Linux device are connected to the same network.
  • Re-enter credentials: If the default login credentials (root/root) do not work, verify if they have been changed previously.


Setting up IPTV on an Enigma 2/Linux device using Putty involves a series of precise steps. By following this comprehensive guide, you can ensure that the process is smooth and successful. Remember to keep your device’s IP address handy, enter the correct command line provided by your IPTV service provider, and reboot your device to apply the new settings. If any issues arise, refer to the troubleshooting tips to resolve common problems. Enjoy your IPTV service!

Buy Enigma from Amazon

enigma 2mom iptv cheaperiptv

2 thoughts on “How to Install ( IPTV.SH ) On ENIGMA 2?

  • Mauris non dignissim purus, ac commodo diam. Donec sit amet lacinia nulla. Aliquam quis purus in justo pulvinar tempor. Aliquam tellus nulla, sollicitudin at euismod.

  • Mauris non dignissim purus, ac commodo diam. Donec sit amet lacinia nulla. Aliquam quis purus in justo pulvinar tempor. Aliquam tellus nulla, sollicitudin al euismod

Leave a comment

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.